Spring Reverb II KIT

New version of the Spring Reverb II effect. 

Features:

- spring reverb with internal Accoutronics tank

- possibility to connect an external tank that bypasses the internal one when inserted

- Reverb, Rate and Depth controls for modulation

- Switch to select reverb and modulation in series or parallel

- Possibility to assemble it with true-bypass* or buffer-bypass** via momentary switch 

Controls:

-Reverb

- Modulation Rate

- Modulation Depth

- Series/Parallel Switches

* True-bypass uses a normal 9-pin latching footswitch.

** Buffer-bypass uses a momentary clickless switch to drive an SPDT relay.  The relay deactivates the effect and maintains the reverb tail when bypassed. The dry signal passes through two buffers powered by dual voltage at +-9V.

Maximum power consumption: 60mA for the version with relay

The PCBA boards come with all SMT (surface-mount technology) components pre-assembled as shown in the photo and require only a few components to complete the finished pedal. The board does not require assembly of SMT parts.

What's inside the kit:

- all the electronic parts needed with PCB

- 2 Jack TS, 1 jack DC

Spring Reverb Tank option adds the internal Accutronics Blue Reverb Tank

Switching option adds the desired switching type (see datasheet for more information)

Enclosure option adds the bare enclosure or pre-drilled enclosure (drilling is done accordingly to the selected options, for example if "No Switch" in "Switching" option  is selected the drilling will not include footswitch hole)

Auxiliary option adds 2 Jack TS for connecting an external tank.

What's not inside the kit:

- knobs

- electrical wire

- rubber feet